Цитата:
Сообщение от doub
при сбросе ошибок сбросили передачи, нейтралка моргает, как выставить их обратно?
|
Весело вы ошибки сбрасываете...
Gear self-acquisition procedure
The gear self-acquisition procedure must be launched from the DDS instrument. This ensures that the data stored previously is deleted and enables the BBS to run a new gear acquisition procedure. With the engine running and the motorcycle in motion:
- Select first gear, pulling the clutch lever completely, dashes “- -“ appear in the gear indicator display. Release the clutch, the letter “C” appears in the display. Keep the motorcycle in this gear for at least five seconds. Select the next gear
- Repeat the above procedure through all the gears, up to sixth gear.
- Downshift through the gears from sixth to first, pulling the clutch lever completely before and releasing after each gear change.
- Reselect neutral and keep in neutral for at least five seconds, repeatedly pulling the clutch lever completely and releasing.
- Shift up through the gears from first to sixth, pulling the clutch lever completely.
- Downshift through all gears to neutral and switch off the motorcycle.
- The self-acquisition procedure is complete.